VR
Gnee Steel News

What should we pay attention to when welding hot-dip galvanized square pipes?

Release Tme: 2023-12-06
Read:
Share:
What should we pay attention to when welding hot-dip galvanized square pipes?
 
Generally, when welding hot-dip galvanized square pipes, it is necessary to check whether the water, electricity, and gas are connected, and all connections must be made as required without loosening. Water, electricity, and gas are all dangerous factors during the welding process of galvanized square and rectangular pipes, so they must be checked before welding.
square pipe
The staff of hot-dip galvanized square pipe manufacturers should use relevant tools to clean the surface of the base material, that is, use brushes or sandpaper to completely remove water, oil, oxides and other impurities on the surface of the base material to ensure welding quality. Pay attention to the cleaning of the hot-dip galvanized square and rectangular pipe welding workplace, keep away from flammable and explosive materials, and take measures to avoid wind. Be sure to carefully check whether the wiring of the welding machine meets the requirements. Problems with wire quality are factors that can easily cause accidents, so you must not take it lightly.
square tube
Pre-welding inspection of hot-dip galvanized square pipes is very necessary because it is directly related to the welding effect. Important welded structures should be cleaned using chemical cleaning methods. You can simply use acetone or caustic soda sulfuric acid to clean water, oil, high melting point oxide film, oxides and other contaminants on its surface.

Regarding the issue of hot-dip galvanized square pipes, the editor will briefly introduce it to you here. I hope that through this article, everyone can understand this.
Related Products
Corrugated Galvanized Steel Sheet
Corrugated Galvanized Steel Sheet
AZ50 Galvalume Steel Coil
AZ50 Galvalume Steel Coil
milano stone coated metal roof tile
Milano Stone Coated Metal Roof Tile
Related News
What are the methods to extend the service life of square pipes?
I believe many people have seen square pipes. During the anti-corrosion construction process of oil (gas) pipelines, the surface treatment of square pipes is one of the key factors that determine the length of the anti-corrosion service life of the pipeline.
2023-12-13
Classification and characteristics of galvanized steel plate
Galvanized steel plate is divided into ordinary electrolytic plate and anti-fingerprint electrolytic plate.
2023-12-08
What Is The Difference Between Cold Rolled Sheet And Galvanized Sheet
Galvanized sheets and cold-rolled sheets are relatively common sheets and are widely used, especially in the construction industry, where their usage rate is higher.
2023-10-26