VR
Gnee Steel News

SPCC Steel

Release Tme: 2023-11-29
Read:
Share:
SPCC Steel
 
SPCC was originally the name of "cold-rolled carbon steel sheets and strips for general use" in the Japanese Standard (JIS). The chemical composition and mechanical properties of PCC are equivalent to Chinese brands Q195 and Q215A. When it is necessary to ensure the tensile test, add T at the end of the grade to indicate SPCCT.

What Is SPCC Steel?
SPCC —- Cold rolled steel sheet and strip of commercial quality;
SPHC —- Hot rolled steel sheet and strip of commercial quality;
SPCD — Cold rolled steel sheet and strip of drawing quality, which is equivalent to St13/14, DC03/04;
SPCE — Cold rolled steel sheet and strip of deep drawing quality. It similar codes are St15/16, DC05/06;
SPHD —- Hot rolled steel sheet and strip of drawing quality;
SGCC —- Hot dip galvanized cold rolled steel of commercial quality.
spcc
The first part represents the material, such as: S (Steel) represents steel, F (Ferrum) represents iron.
The second part represents different shapes, types, and uses. For example, P (Plate) represents plate, T (Tube) represents tube, and K (Kogu) represents tool.
The third part indicates the production method, and C is the abbreviation of cold rolling.
The fourth part represents the minimum tensile strength. C——Common grade, D——Draw grade, E——Deep drawing grade (Elongation)

SPCC was originally the name of "cold-rolled carbon steel sheets and strips for general use" in the Japanese Standard (JIS).
Note: Similar grades include SPCD (cold-rolled carbon steel sheets and strips for stamping), SPCE (cold-rolled carbon steel sheets and strips for deep drawing), SPCCK\SPCCCE, etc. (special steel for televisions, SPCC4D\SPCC8D, etc. (hard steel Steel, used for bicycle rims, etc.), used in different occasions.
spcc steel
Note: The tensile test takes the transverse pattern; the pattern width b is 25mm, and the pattern gauge length L0 is 50mm.
When the product thickness is >1.50mm and ≤2.0mm, the value of r90 or r is allowed to be reduced by 0.1 (absolute value); when the thickness is >2.0mm, the value of r90 or r is allowed to be reduced by 0.2 (absolute value).
SPCC was originally the name of "cold-rolled carbon steel sheets and strips for general use" in the Japanese Standard (JIS). Now many countries or companies directly use it to represent similar steel products they produce (for example, Baosteel Q/BQB402 standard has SPCC).

Classification
1.4 Applicable grades for Japanese cold-rolled carbon steel sheets: SPCC, SPCD, SPCE Symbols: S-steel (Steel), P-plate (Plate), C-cold-rolled (cold), the fourth digit C-common grade (common) , D- stamping grade (Draw), E- deep drawing grade (Elongation)
Heat treatment status: A-annealed, S-annealed + flat, 8-(1/8) hard, 4-(1/4) hard, 2-(1/2) hard, 1-hard .
Drawing performance level: ZF - used for punching and drawing the most complex parts, HF - used for punching and drawing complex parts, F - used for punching and drawing complex parts.
Surface processing status: D - pitted surface (the roll is shot peened after being processed by a grinder), B - bright surface (the roll is finished by a grinder).
Surface quality: FC-high-grade finished surface, FB-higher-grade finished surface. Status, surface processing status, surface quality code, drawing level (only for SPCE), product specifications and dimensions, shape accuracy (thickness and/or width, length, unevenness).
Marking example: steel plate, standard number Q/BQB402, grade SPCC, heat treatment state annealed + smooth (S), surface processing state is pitted D, surface quality is FB grade trimmed (trimmed edge EC, non-trimmed EM) steel plate , thickness 0.5mm, B-level accuracy, width 1000mm, A-level accuracy, length 2000mm, A-level accuracy, unevenness accuracy PF.A, then the mark is: steel plate ECQ/BQB 402-SPCC-SD-FB/(0.5B ×1000A×2000A-PF.A)

spcc uses:
1. Used in the production of steel structure parts, bridges, ships and vehicles.
2. Adding special elements (P, Cu, C, etc.), it has good corrosion resistance and atmospheric corrosion resistance. It is used in the production of containers, special vehicles, and building structures.
3. High-strength steel plate with good stamping performance and welding performance, used in the production of automobile FRAME, WHEEL, etc.
4. Carbon steel, alloy steel, and tool steel are used for general mechanical structures and are used in the production of various mechanical parts after heat treatment.
Next Article:
Related Products
mild steel cold rolled sheet
G90 Steel Sheet Gi Coil for Automotive Plates
Baosteel CRGO B20r070 Laser Scribed Silicon Steel
Baosteel CRGO B20r070 Laser Scribed Silicon Steel
Stone Chips Coated Metal Roofing Tile
Stone Chips Coated Metal Roofing Tile
Related News
Cold rolled galvanized steel
Cold rolling and hot rolling processes are two forming methods for steel.
2024-03-29
Silicon Steel Sheet Performance Indicators
Performance of silicon steel sheet 1: The silicon steel sheet is required to have low iron loss. Low iron loss of silicon steel sheets is an important indicator of the quality of silicon steel sheets.
2024-02-22
SPCC Cold Plate
The spcc cold plate is a cold plate made in accordance with Japanese standards (JIS). SPCC was originally the name of "general cold-rolled carbon steel sheets and strips" of the Japanese Standard (JIS). Now many countries or companies directly use it to represent similar steel products they produce.
2023-11-01