GNEE Steel In-House Capabilities GNEE Steel maintains a large inventory of Electrogalvanized Steel sheet and coil products ranging in thickness. In addition, our equipment enables us to provide all your Electrogalvanized & Zinc Coated Steel process needs.
Element code | C | Si | Mn | P | S |
Content(%) | <0.12 | <0.05 | <0.50 | <0.025 | <0.025 |
The content of other residual elements in steel should meet the following requirements:
Cu<0.15%, Ni<0.15%, Cr<0.15%, As<0.05%, Sn<0.05%.
Tensile Strength | Yield Strength | Thickness(mm)Elongation % | |||||
---|---|---|---|---|---|---|---|
MPa | MPa | 0.25~<0.4 | 0.4~<0.6 | 0.6~<1 | 1<1.6 | 1.6~<2.5 | ≥2.5 |
300~400 | 250~320 | ≥32 | ≥34 | ≥36 | ≥37 | ≥38 | ≥40 |
Specifications | JIS G3313 SECC | JIS G3313 SECD | JIS G3313 SECE |
Quality | Commercial Quality | Drawing Quality | Deep Drawing Quality |
Usage | Furniture, Computer Case, Electronic Parts, Electrical Equipment | Automobile | Automobile |
Type of Surface Treatment | Chromate Treatment, Phosphate Treatment, Oiling | ||
Available Size | Thickness: 0.3~1.6mm Width: 850~1580mm Coating Weight: 10-30g/m (single side) Max. Coil Weight: ≦ 20 MT |
The table above shows the widest range of product dimensions. For a detailed acceptable order range, please contact us.