wholesale Prime quality cold rolled gi galvalume coil

Cold-rolled steel is low-carbon hot-rolled steel that has been rolled at room temperature, below its recrystallization temperature. The steel is then cleaned of oxide scale and finished in a specific series of rolling to just over the desired thickness, heating to controlled temperatures, and final rolling to the desired thickness.

Galvanized Steel Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics. Usually, hot-dipped galvanized steel sheet and galvanized steel coil process and specifications are basically the same.

Cold rolled galvanized steel coil
It is cold-rolled or hot-rolled, long and narrow long steel plate is coated with a layer of raw materials called (zinc, aluminum) to varying degrees. Hot-dip galvanizing has the advantages of uniform coating, strong adhesion and long service life. The hot-dip galvanized strip steel matrix undergoes a complex physical and chemical reaction with the molten plating solution to form a corrosion-resistant zinc-iron alloy layer with a compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, its corrosion resistance is strong.

Factory Cold Rolled Steel Coil Full Hard galvanized Steel Coil immersing the thin steel plate in the molten zinc bath, and adhering a layer of zinc thin steel plate on the surface. It is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the zinc-melted plating tank to make galvanized steel plate; alloyed galvanized steel plate.

Galvanized steel coil, immersing the thin steel plate in the molten zinc bath, and adhering a layer of zinc thin steel plate on the surface. It is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the zinc-melted plating tank to make galvanized steel plate

Coils are divided into chilled coils and cold rolled coils. The difference between the two is that in appearance, the general chilled coil is slightly black; the surface quality, structure, and dimensional accuracy of the cold-rolled sheet are better than that of the chilled coil; in terms of performance, because the hot-rolled coil goes through the cold rolling process The directly obtained chilled coils undergo work hardening during cold rolling, resulting in an increase in yield strength and some residual internal stress, and the external performance is relatively “hard”, so it is called chilled coils.

The DC04 galvanized sheet metal coil Cold Rolled steel coil is packed with PVC film or water-proof kraft in the first layer, the second layer is iron sheet package, then wrapped on the metal pallet or metal square tube with steel strip. It’s is water-proof and sea-worthy, and warmly welcomed by the customers. OEM accepted, besides, the pakage can also be according to your demands.

Galvalume Coil composition by weight ratio of 55% aluminum,43.4% zinc,1.6% silicon, at high temperature 600 high temperature solidification and aluminized zinc plate surface is a unique smooth flat gorgeous star flower, the base color is silver white special coating structure makes it has excellent corrosion resistance

Cold-rolled is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high. It must be annealed to restore its mechanical properties, and those without annealing are called hard rolled coils.

cold rolled zinc coated g120 galvanized steel coil is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high.

Cold rolled steel is our most common and commonly used cold rolled products.Its brand can be generally divided into: ST12, ST13, ST14, ST15, ST16 and so on.

Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

The hot plate is divided into the pickling plate and the unpickling plate. The surface of the pickling plate becomes the normal metal color because of pickling, but the surface of the unsold-rolled plate is not as high as that of the cold-rolled plate, or the existence of ferrosoferric oxide layer, colloquially it is fire-roasted, and if the storage environment is not good, usually with a little embroidery.