Wholesale Cold Rolled steel coil

Cold-rolled sheet in coil form is produced by removing rust from hot-rolled sheet by “pickling” it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll.

SS400 zinc Cold Rolled Steel Coil refers to a steel strip that is directly rolled into a certain thickness with a roll at room temperature and rolled into a whole coil with a coiler. Compared with hot-rolled coils, cold-rolled coils have a brighter surface and higher finish, but will generate more internal stress and are often annealed after cold-rolling.

Galvanized steel is defined as a carbon steel sheet coated with zinc on both sides.Galvanized steel coils are widely used in the construction industry, as raw material for the production of corrugated panels, fencing products, drywall panel profiles, ventilation systems etc. Recommended for both outside and inside usage, galvanized steel has a high resistance to corrosion in different environments, due to a protective layer of zinc of 30 – 275 grams per squaremeter

Cold-rolled galvanized sheet is a kind of galvanized steel sheet. Steel sheets are classified into two types: hot-rolled and cold-rolled. Cold-rolled sheet is flat, rectangular, and can be directly rolled. Cold rolling is a steel sheet in which the steel sheet is further thinned to a target thickness at room temperature. Compared with hot-rolled steel sheet, cold-rolled steel sheet has more accurate thickness, smooth and beautiful surface, and also has various superior mechanical properties, especially in terms of processability.

Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

Cold-rolled coils are a steel product produced by applying plastic deformation to hot-rolled steel on cold-rolling mills. With such processing, the product can have more accurate dimensional tolerances, better surface quality and improved mechanical properties as compared with hot-rolled coils. Cold rolling is also used to make thinner coils than hot-rolling mills can currently produce (less than 0.8-1.0 mm).

Cold coil is made of hot rolled coil at room temperature and below the recrystallization temperature, including plate and coil, of which the sheet delivered is called steel plate, also known as box plate or plate; the long length and delivered in coil is called steel strip, also known as coil plate.

Top quality JIS 0.45mm*1200mm galvanized steel coil can produce zero spangles, small spangles, ordinary spangles, etc. The thickness is from 0.125mm to 4.5mm, the width is from 500mm to 1250mm, the zinc coating is from 40-275 g/m², the surface is passivated and oil can be coated.

Galvalume Coil composition by weight ratio of 55% aluminum,43.4% zinc,1.6% silicon, at high temperature 600 high temperature solidification and aluminized zinc plate surface is a unique smooth flat gorgeous star flower, the base color is silver white special coating structure makes it has excellent corrosion resistance

Factory Direct Sale Cold Rolled Zinc Coated Galvanized Steel Coils is rolled at room temperature and then rolled again below its recrystallization temperature. This process enables better control over finished product shape, thickness, dimensions, and a more consistent finish.

We serve the Roofing,Fabrication industries across markets in Asia,Africa and the Americas.Our strength is our long term supply base with products originating out of partner factoties in China.Our products are used by end user factories,Consumer Durables manufacturers and the Construction sector.

Galvanized strip steel is a cold-rolled or hot-rolled, long and narrow strip of steel that is plated with a layer of raw materials called (zinc, aluminum) to varying degrees. Hot-dip galvanizing has the advantages of uniform coating, strong adhesion and long service life.

This product is based on cold -rolled steel strip as substrate,after continuous hot-dip galvanizing process and produced products.It is an excellent resistance to atmospheric corrosion of coated steel,cold-rolled sheet coil after the galvanized can extend the service life for 15-20 years.

ASTM Cold Rolled Dipped GI Galvanized Steel Coil GI Strip Coil is hot-rolled steel that has been cleaned of iron oxide scale (pickled) and reduced to a specific thickness through a series of rolling stands (tandem mill) or passed back and forth through a reversing rolling mill. The steel can be heated to controlled temperatures (annealing) depending on mechanical property requirements, and final rolled to the desired thickness.

It is produced through a process of metal coating which involves passing cold rolled coils through a zinc pot. The process ensures the adherence of zinc to the surface of steel sheet.The zinc layer provides excellent corrosion resistance so that it can prolong the service life of the product.

z180 z275 z350 Galvanized Steel Coil Cold Rolled coil has Lowest Long Term Cost – invariably more cost effective in the long term because it lasts longer and needs less maintenance.Reliability – Coating life and performance are reliable and predictable.