Sgcc Z18 Galvanized cold rolled steel coil--GNEE(TIANJIN)MULTINATIONAL TRADE CO.,LTD

Cold rolled steel coil JIS G3141-2005 is produced by pickling hot-rolled coil and rolling it uniformly at an appropriated temperature to a thinner thickness. Cold rolled steel coil JIS G3141-2005 h...

Cold rolled steel coil JISG3141-2005

Cold rollde steel coil JISG3141-2005 SPCE main application Cold rollde steel coil JISG3141-2005 SPCE has a stretch of deep drawing purposes, its deep drawing performance than (SPCC) and SPCD ,and ...

Cold rollde steel coil JISG3141-2005 SPCE

The dimension of SC2 cold rolled steel we can supply is 0.3 mm-3.5mm for the thickness,and the width is 120mm-1850mm.

dimension of SC2 cold rolled steel

Cold rolled steel coil is a type of steel coil product developed from hot rolled steel coil and sheet, surface quality and dimension precision are quite low after hot rolling process, it can’t be u...

Dx51 Steel Galvanized Coil Cold Rolled Steel Coil

Other shapes can be cold-rolled if the cross-section is relatively uniform and the transverse dimension is relatively small. Cold-rolled shapes are processed in a series of shaping operations. This...

Cold-rolled shape coil

Cold-rolled steel coils are made of hot-rolled coils and rolled at room temperature below the recrystallization temperature. Cold-rolled steel has good performance. That is, cold-rolled steel can be thinner and more precise.

DX51D Zinc Coating Cold Rolled Steel Z275 Galvanized Steel Coil

Cold rolled slitting Plate thickness Plate width Number of slitting strips minimum Precision for strip width Allowable coil weight 0.15-0.4 200-1800 50 10 ±0.03 20 0.4-1....

stainless steel cold steel coil

Cold Rolled Steel Coil have good properties, and cold-rolled strips and steel sheets with thinner thickness and higher precision can be obtained by cold-rolling.

Cold Rolled Steel Coil

Cold Rolled Steel has a silicon content of 0.5% to 3.0%, and the supply state is 0.35mm and 0.5mm thick steel strip after cold rolling to finished product thickness.

Cold Rolled Steel Sheet

The table below shows the approximate mechanical properties corresponding to the five commercial tempers of cold-rolled carbon steel strip. This table is presented as a matter of general informatio...

commercial temper cold sheet

After the Sgcc St37 Galvanized cold rolled steel coil is pulled out of the zinc pot, the appearance of the crystal grains formed as the zinc layer cools and solidifies is called spangles. The size,...

Sgcc St37 Galvanized cold rolled steel coil

Cold-rolled steel is simply hot-rolled steel with additional processing to make it a smoother and more versatile material. Cold rolled steel is a versatile sheet metal product formed by passing a s...

additional cold sheet

Every time you see an architect creating unique shapes in their designs by wrapping around the structure like ribbons or bending it, so each section of the building connects seamlessly, it’s thanks...

Kitchen appliances cold plate

Cold-rolled steel coils have good properties, and cold-rolled strips and steel sheets with thinner thickness and higher precision can be obtained by cold-rolling. High flatness, high surface finish...

Metal Building ASTM Steel cold Rolled Steel Plate Coil

Galvanized steel coil, also known as galvanized coil, is a kind of galvanized coil product. Galvanized coil, a kind of steel material coated with zinc. Galvanized coil is the predecessor of galvani...

cold rolled steel coil GI galvanized steel coil

Sgcc Z18 Galvanized cold rolled steel coil--The thin steel plate is immersed in the dissolved zinc tank to make the thin steel plate with a layer of zinc adhered to the surface. Thickness ...

Sgcc Z18 Galvanized cold rolled steel coil

While both are formed using the same process and are longer and wider than they are thick, they do differ in just how thick they are. With steel, anything less than about 3 mm or ⅛ inch in thicknes...

same process cold plate

A cold rolled steel plate is a volume of an iron-based alloy that is longer and wider than it is thick with approximately 2% or less carbon or any other alloying element in it. A cold rolled steel ...

iron-based alloy cold rolled steel plate

Other shapes can be cold-rolled if the cross-section is relatively uniform and the transverse dimension is relatively small. Cold-rolled shapes are processed in a series of shaping operations. This...

Cold-rolled shapes the lines of sizing

Cold-rolled steel refers to low-carbon steel produced by a “cold rolling” method and processed at near normal room temperatures. Cold-rolled steel offers superior strength and machinability. Cold-r...

Cold-rolled steel coil

Commercial Steel Types A, B, and C Drawing Steel Types A and B Structural Steel (SS Grades 30, 33, & 36), Types 1 & 2, 40, 45, 50, and 55 High-Strength Low-Alloy Steel (HSLAS) Clas...

Commercial Steel cold coil

Cold rolled sheet or plate is put into a furnace and heated to a temperature below the melting point of the material. The steel is removed from the furnace and allowed to cool to room temperature. ...

cool cold steel plate

Cold rolled steel plate is an iron-based alloy that can be made from one of several different chemical compositions. It can be a low carbon steel, meaning it has less than 0.3% carbon as measured b...

Cold rolled medium carbon steel

Our Cold rolled G90 Galvanized steel sheet in coil daily Productivity is more than 1000 tons, and our inventory is guaranteed to be more than 5000 tons, so as to ensure that the customer's products...

Cold rolled G90 Galvanized steel sheet in coil

s235 Cold Rolled zinc Steel Sheet steel coil is among the most popular steel types because of its extended durability, having the strength and formability of steel plus the corrosion protection of ...

s235 Cold Rolled zinc Steel Sheet steel coil

Cold-rolled steel has more strength and durability than hot-rolled because of its relatively low-alloy content. However, it will be slightly less malleable and have a lower thermal conductivity com...

content cold plate

Cold-rolled steel coils have good properties, and cold-rolled strips and steel sheets with thinner thickness and higher precision can be obtained by cold-rolling. High flatness, high surface finish...

building material cold rolled coil

Cold coil is made of hot rolled coil at room temperature and below the recrystallization temperature, including plate and coil, of which the sheet delivered is called steel plate, also known as box...

5mm Thick High Quality GI/ZINC coated Cold Rolled Galvanized Steel Coil

Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. The...

Cold Rolled Zinc Coated Steel Roofing Ppgi Galvanized Steel Coils

The hot-rolled, pickled coils incoming to the cold reduction mill have to have excellent quality attributes. The pickling operation must be well-controlled to assure that all the oxides formed duri...

annealed product sheet cold steel

High quality cold rolled steel coil full hard Galvanized steel coil is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high.

High quality cold rolled steel coil full hard Galvanized steel coil

Our company’s business includes the color coated sheet, Cold Rolled Hot Zinc Coated Galvanized Steel Coils Metal Roll,cold rolled sheet, galvanized sheet, color coated corrugated sheet and galvanized corrugated sheet. It can be customized according to customers’requirements and we provide the best quality and low price products for them.

Cold Rolled Hot Zinc Coated Galvanized Steel Coils Metal Roll

Mechanical properties of grade SC2 Proof strength Rp0.2 (MPa) Tensile strength Rm (MPa) Impact energy KV (J) Elongation at fracture A(%) Reduction in cross section on fracture Z(%) A...

Cold rolled steel

Cold rolling processes steel into basic shapes such as tubes, squares and sheets without heat, which ensures that the steel maintains an incredibly high level of strength and resilience.

Cold Rolled Steel Plate

cold rolled steel coils SPCC Tensile ductility level: ZF-For the most complex parts of coining the drawingHF-Used to punch the drawing parts is very complex F-Used to punch the drawing com...

cold rolled steel coils SPCC

Thickness	0.1~20 mm
Length	100~12000 mm
Width	10~2000 mm
Standard	ASTM, JIS, GB, AISI, DIN, BS,EN
Certifications	ISO 9001 BV SGS
Packing	Industry standard packaging or according to client’s requirement