Q195 Q345 0.8mm galvanized steel galvanized steel coils
Hot-dip galvanizing is the reaction of molten metal with an iron substrate to produce an alloy layer, thereby combining the substrate and the plating layer. Hot-dip galvanizing is to pickle iron and steel parts first. In order to remove iron oxide on the surface of iron and steel parts, after pickling, it is cleaned in an ammonium chloride or zinc chloride aqueous solution or a mixed solution of ammonium chloride and zinc chloride.And then sent to the hot-dip plating bath. Hot-dip galvanizing has the advantages of uniform coating, strong adhesion and long service life.
Material
|
Q235 Q195 / Q235 / Q345B / DB460 ASTM/AISI/SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345
|
Thickness
|
0.12-6.0mm
|
Width
|
20-1500mm
|
Zinc coating
|
Z40-600g/m2
|
coil weight
|
3-5 Tons or as requirment
|
surface
|
Galvanized Coated
|
certificate
|
ISO ,SGS,SAI
|
Product Advantages:
01.Cheap:The cost of hot-dip galvanizing is lower than that of other coatings.
02.Reliable:The zinc coating is metallurgically bonded to the steel and forms part of the steel surface,so the coating is more durable.
03.Strong toughness:The galvanized layer forms a special metallurgical structure that can withstand mechanical damage during transportation and use.
04.Comprehensive protection:Every part of the plated piece can be galvanized,and is fully protected even in depressions,sharp corners,and hidden places.
05.Save time and energy:Galvanizing process is faster than other coating methods.