Prime DX51D ZINC Coated GI Galvanized cold rolled Steel Coil
Coils are divided into chilled coils and cold rolled coils. The difference between the two is that in appearance, the general chilled coil is slightly black; the surface quality, structure, and dimensional accuracy of the cold-rolled sheet are better than that of the chilled coil; in terms of performance, because the hot-rolled coil goes through the cold rolling process The directly obtained chilled coils undergo work hardening during cold rolling, resulting in an increase in yield strength and some residual internal stress, and the external performance is relatively “hard”, so it is called chilled coils.
Coils are divided into chilled coils and cold rolled coils. The difference between the two is that in appearance, the general chilled coil is slightly black; the surface quality, structure, and dimensional accuracy of the cold-rolled sheet are better than that of the chilled coil; in terms of performance, because the hot-rolled coil goes through the cold rolling process The directly obtained chilled coils undergo work hardening during cold rolling, resulting in an increase in yield strength and some residual internal stress, and the external performance is relatively “hard”, so it is called chilled coils.
Quality | Prime/Secondary Quality |
Certificate | ISO9001, SGS |
Thickness | 0.12-1.5mm |
Width | 30-1500mm |
Length | As customer’s requirements |
Grade | SGCC/DX51D/SGCH |
Zinc/AZ |
30-275g/m2 |