Mechanical Properties of cold-rolled steel coil

Cold coil is made of hot rolled coil at room temperature and below the recrystallization temperature, including plate and coil, of which the sheet delivered is called steel plate, also known as box plate or plate; the long length and delivered in coil is called steel strip, also known as coil plate.

Galvanized steel coil is a kind of steel coil that immersed in the dissolved zinc bath to adhere to the surface with a layer of zinc. At present, the main method is to make galvanized steel coil be dipped in a bath with dissolved zinc.

Top quality JIS 0.45mm*1200mm galvanized steel coil can produce zero spangles, small spangles, ordinary spangles, etc. The thickness is from 0.125mm to 4.5mm, the width is from 500mm to 1250mm, the zinc coating is from 40-275 g/m², the surface is passivated and oil can be coated.

ASTM Cold Rolled Dipped GI Galvanized Steel Coil GI Strip Coil is hot-rolled steel that has been cleaned of iron oxide scale (pickled) and reduced to a specific thickness through a series of rolling stands (tandem mill) or passed back and forth through a reversing rolling mill. The steel can be heated to controlled temperatures (annealing) depending on mechanical property requirements, and final rolled to the desired thickness.

Cold-rolled galvanized sheet is a kind of galvanized steel sheet. Steel sheets are classified into two types: hot-rolled and cold-rolled. Cold-rolled sheet is flat, rectangular, and can be directly rolled. Cold rolling is a steel sheet in which the steel sheet is further thinned to a target thickness at room temperature.

Cold-rolled steel coils have good properties, and cold-rolled strips and steel sheets with thinner thickness and higher precision can be obtained by cold-rolling. High flatness, high surface finish, clean and bright surface of cold-rolled sheet. It is easy to be coated and processed and has the characteristics of high stamping performance and low yield point, so cold-rolled steel coil has a wide range of uses, mainly used in automobiles and building materials. At the same time, it is also the substrate for the production of galvanized steel sheets in coil and galvalume steel coil.

Cold rolled steel coil is rolled at room temperature and then rolled again below its recrystallization temperature. This process enables better control over finished product shape, thickness, dimensions, and a more consistent finish.

z350 Prime Galvanized Cold Rolled Steel Coil also known as galvanized coil, is a galvanized coil product. Galvanized coil, a steel material coated with zinc. The galvanized coil is the predecessor of the galvanized sheet. The galvanized coil is cut into sheets by equipment.

DX51D zinc cold rolled coated galvanized steel coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

The process of cold rolling increasing the SGCC DX51D ZINC Cold rolled coil’s strength and hardness, while decreasing its ductility.

cold rolled zinc coated g120 galvanized steel coil is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high.

The mechanical engineering workshops of our factory are all equipped with numerical central control ,Our factory has been constantly improving the platform construction, improving the quality of technical team, strengthening the invention of products category, formed complete R & D system and production quality management system, wined high reputation in the iron and steel industry.

Cold-rolled is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high.