JIS G3141 SPCEN Deep Drawing Quality Annealed Cold rolled steel coil--GNEE(TIANJIN)MULTINATIONAL TRADE CO.,LTD

The table below shows the approximate mechanical properties corresponding to the five commercial tempers of cold-rolled carbon steel strip. This table is presented as a matter of general informatio...

commercial temper cold sheet

There are many other grades of steel plates and sheets with specialized properties. If you need it, we can get it! Yield strength is the amount of force that can be withstood before permanent d...

permanent cold steel plate

This is the most common and simple finish and the first step to making steel plates and sheets. A steel slab is heated, typically to 1,700 degrees F, and passed through a series of rollers - each s...

steel slab heated cold plate

Cold-rolled steel is essentially hot-rolled steel that is additionally processed. To initially create hot-rolled steel, suppliers start with rectangular billets of steel that pre-processes through ...

raw material cold steel plate

Hot-rolled steel is rough and has a flaky surface that makes it hard to paint. On the other hand, cold-rolled steel doesn’t have a surface mill scale due to the additional processing. It is smooth ...

apply various cold steel plate

The steel exits the last set of pinch rolls just before entering a furnace at approximately 1400 degrees F(760 degrees C). Any internal stresses from rolling can be removed, and the sheet is soften...

further processing cold plate

The following features will help you identify cold rolled steel: Smooth surfaces usually have an oily-like touch The surface has better finish qualities and tighter tolerances Square bar...

identify cold rolled steel

The material is processed further once it cools. Manufacturers continue to roll out the cooled material during a cold forming stage. Depending on how the client will use the product, workers can co...

corrosion resistance plate

Cold rolled steels are generally not available in a high carbon content form because the increase in hardness that carbon gives to steel makes them difficult to form at room temperatures. A cold r...

Cold rolled steel carbon plate

This product is manufactured for a large number of applications that require a variety of properties from fairly simple to very sophisticated. The product is typically available at thickness as low...

lighter gauges cold steel plate

Cold rolled sheet products have been available for many years and are used for a multitude of applications such as appliances – refrigerators, washers, dryers, and other small appliances, automobil...

Cold rolled sheet

In this technics processing, it was processed by the hot rolled steel sheet at the condition for room temperature. Although the steel sheet temperature will get raise due to the rolling processing,...

technics processing cold steel sheet

Product Name JIS G3141 SPCEN Deep Drawing Quality Annealed Cold rolled steel coil Grade DC01, DC02, DC03, DC04, ST12, ST13, ST14, ST15, SPCC, SPCD, SPCE,SPCEN, Q195,Q215,Q235,08AL ...

JIS G3141 SPCEN Deep Drawing Quality Annealed Cold rolled steel coil

Steel sheets and plates are made by rolling a slab of steel through a series of rollers until the desired thickness and material properties are achieved. Each stage in the rolling and finishing pro...

achieved cold plate

As a professional manufacturer of galvanized steel products, we have attained some awards and certifications including: 1.ISO 9001 Quality Management System Certification 2.ISO 14001Environmental...

professional cold rolled steel plate

Name: Cold Rolled Steel Plate Width: 900-1250mm Thickness: 0.14-1.2mm Length: As customer's request Coils Weight: 2.0-6.0MT or according to customer's request Strength of Extension: According ...

Cold Rolled Steel Plate Strength

Steel plates and sheets are some of the most useful materials to have on a construction site. Their strength and durability are assets that can be appreciated by anyone who has ever built a structu...

construction site cold sheet

The cold reduction operation induces very high strains (work hardening) into the sheet; thus, the sheet not only becomes thinner, but also becomes much harder, less ductile, and very difficult to f...

cold reduction plate

Essentially, cold rolled steel refers to hot rolled steel that has undergone further processing. As mentioned earlier, rolling involves the range of processes involved in forming the steel, includi...

cold rolled steel refer

This means that the thickness of each hot-rolled coil is carefully controlled to provide the mill with a specific thickness to achieve the proper percent cold reduction. Among other things, the per...

forming behavior cold sheet

The cold reduction operation induces very high strains (work hardening) into the sheet; thus, the sheet not only becomes thinner, but also becomes much harder, less ductile, and very difficult to f...

soft cold sheet

The hot-rolled, pickled coils incoming to the cold reduction mill have to have excellent quality attributes. The pickling operation must be well-controlled to assure that all the oxides formed duri...

important cold steel sheet

The cold rolled steel plate can be used as packaging materials for chemical industry, dye, oil etc. it can also be processed for household appliance, motorcycle cylinder, chassis, agricultural vehi...

cold rolled steel plate materials

A roll or sheet of hot-rolled steel is dipped or passed through a pickling bath. A solution of very strong acid removes the scale and dirt from the sheet or plate, leaving the raw steel exposed. It...

raw steel cold sheet

The first step in manufacturing Cold Rolled Sheet steel Products involves cold reducing coils of hot-rolled, pickled product to a thinner thickness. The primary feature of cold reduction is to redu...

Cold Rolled Sheet steel

Steel plates and sheets are some of the most useful materials to have on a construction site. Their strength and durability are assets that can be appreciated by anyone who has ever built a structu...

structure using steel cold sheet

Cold rolled steel is steel which has been rolled at room temperature, below its recrystallization temperature. Compare with hot rolled steel sheet, the thickness of cold rolled steel sheet is more ...

Cold rolled steel plate

This product is manufactured for a large number of applications that require a variety of properties from fairly simple to very sophisticated. The product is typically available at thickness as low...

application cold sheet

This selection of steel sheets and plates is cold rolled, meaning these products have improved surfaces, greater uniformity in thickness, and better mechanical properties than hot rolled steel. Its...

cold rolled surface steel sheet

Cold rolled steels are generally not available in a high carbon content form because the increase in hardness that carbon gives to steel makes them difficult to form at room temperatures. A cold r...

high carbon content cold sheet

In this technics processing, it was processed by the hot rolled steel sheet at the condition for room temperature. Although the steel sheet temperature will get raise due to the rolling processing,...

room temperature cold steel sheet

Suppliers use hot-rolled steel, and once it has cooled, they continue to re-roll that material at room temperature. The finished product has a more consistent shape, smoother surface, and precise d...

room temperature cold plate

Hot rolled steel is the easiest and cheapest sheet steel to find. It is fairly ductile, and thinner sheets can be easily formed with hand tools. Its dimensions are less refined compared to cold rol...

fairly ductile cold sheet

Suppliers use hot-rolled steel, and once it has cooled, they continue to re-roll that material at room temperature. The finished product has a more consistent shape, smoother surface, and precise d...

more consistent shape cold sheet

Hot rolled steel is the easiest and cheapest sheet steel to find. It is fairly ductile, and thinner sheets can be easily formed with hand tools. Its dimensions are less refined compared to cold rol...

fairly ductile cold steel sheet

Product Name	JIS G3141 SPCEN Deep Drawing Quality Annealed Cold rolled steel coil
Grade	DC01, DC02, DC03, DC04, ST12, ST13, ST14, ST15, SPCC, SPCD, SPCE,SPCEN, Q195,Q215,Q235,08AL
Standard	DIN-1623, EN-10130, JIS-G3141, etc.
Thickness	0.1-3.5mm
Width	100-1500mm
Coil Weight	3-14 Ton
Coil ID	508mm/610mm
Surface	Dull finish/Bright finish