Hot Dipped GI Steel Coil DX51D Z180
Galvanized coil is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously immersed in the molten zinc plating bath to make galvanized steel plate; Alloyed galvanized steel sheet.
Thickness
|
0.12-4.0mm
|
Width
|
600-1500 mm
|
Tolerance
|
+/-0.02mm
|
Zinc coating
|
40-600g/m2
|
Surface treatment
|
Unoil,dry,chromate passivated, non-chromate passivated
|
Spangle
|
Regular spangle,minimal spangle, zero spangle,big spangle
|
Coil ID
|
508mm/610mm
|
Coil Weight
|
3-8 tons
|
Technique
|
Hot rolled, cold rolled
|
For galvanized steel coils, the steel sheet is immersed in a molten zinc bath to make a sheet of zinc coated on its surface. It is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously immersed in a plating tank with zinc melted to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also manufactured by hot dip method, but immediately after being out of the tank, it is heated to about 500 ℃ to form an alloy coating of zinc and iron. This galvanized coil has good paint adhesion and weldability.
FAQ
1. Minimum Order Quantity?
A: The MOQ is 22 tons, the galvanized steel sample is available as long as your quantity is ok.
2. What kind of terms of payment?
A: T/T, L/C are available.
3. What grams of the product can you offer?
A: These products can be customized according to your requirement.
4.Is free sample available?
A: Yes, free sample is available.
5. Can you do Customization & Reproduction if I provide a photo?
A: Yes, we do Customization & Reproduction service.
Our Email: info@gescosteel.com.