Home » Galvanized Steel Coil » Hot-dip galvanized steel coil

Hot-dip galvanized steel coil

Another method of galvanizing process is continuous galvanizing.After continuous galvanizing passes through the zinc bath, galvanizing will be performed on the surface of the continuous steel strip...
Rated 4.8/5 based on 548 customer reviews
Share:
Content

Another method of galvanizing process is continuous galvanizing.After continuous galvanizing passes through the zinc bath, galvanizing will be performed on the surface of the continuous steel strip (coil). The Hot-dip galvanized steel coil runs at about 600 feet per minute. When the coil leaves the zinc bath, it takes away an extra layer of molten zinc. Use high-pressure air (air knife) to remove excess zinc to form the desired thickness. The Hot-dip galvanized steel coil is then allowed to cool and form a shiny finish.

Hot-dip galvanized steel coil Description

Thickness(mm)
Hot Rolled Thickness:0.12 ~ 3.00 mm

Cold Rolled Thickness:1.20 ~ 4.60 mm
As Your Request
Width(mm)
600mm-2200mm, As Your Request

Regular width 1000mm, 1250mm, 1500mm
Tolerance
Thickness: ±0.01 mm

Width: ±2 mm
Coil ID
508-610mm or as per your request
Coil Weight
3~5 Tons or as per your request
Zinc Coating
30g – 275g / m2
Spangle
Big spangle,Regular spangle,Mini spangle,Zero spangle
Surface Treatment
Coated,Galvanized,Clean, Blasting and Painting according to customer requirement
Inquiry


    More Galvanized Steel Coil