Good Quality Cold Rolled Steel zinc Coil

az50 galvalumed steel zinc coated Cold rolled coil composition by weight ratio of 55% aluminum,43.4% zinc,1.6% silicon, at high temperature 600 high temperature solidification and aluminized zinc plate surface is a unique smooth flat gorgeous star flower, the base color is silver white special coating structure makes it has excellent corrosion resistance

ASTM standard size cold rolled galvanised steel coil –Dip a sheet of zinc into a molten zinc bath so that galvanized steel coil’s surface adheres to a sheet of zinc.At present, galvanized steel coil’s main use of continuous galvanized process production, that is, the coil of steel plate continuously immersed in the melting zinc plating tank made of galvanized steel plate;Alloyed galvanized steel sheet.

Cold rolled steel is hot-rolled steel that has been cleaned of iron oxide scale (pickled) and reduced to a specific thickness through a series of rolling stands (tandem mill) or passed back and forth through a reversing rolling mill. The steel can be heated to controlled temperatures (annealing) depending on mechanical property requirements, and final rolled to the desired thickness.

Cold-rolled sheet coil has good properties, that is, cold-rolled strip and steel sheet with thinner thickness and higher precision can be obtained by cold-rolling, with high flatness, high surface finish, clean and bright surface of cold-rolled sheet, and easy to be coated. It has a wide range of processing and varieties, and has a wide range of uses.

Cold-rolled steel coils are made of hot-rolled coils and rolled at room temperature below the recrystallization temperature. Cold-rolled steel has good performance. That is, cold-rolled steel can be thinner and more precise.

Cold rolled steel coil is a type of steel coil product developed from hot rolled steel coil and sheet, surface quality and dimension precision are quite low after hot rolling process, it can’t be used where surface quality and dimensions are required. Until now, cold rolled coils have been available and successfully used for a variety of applications.

Cold-rolled sheet in coil form is produced by removing rust from hot-rolled sheet by “pickling” it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll.