GI galvanized steel 0.2mm thick cold rolled galvanized coil
Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate. The hot plate is divided into the pickling plate and the unpickling plate.
Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate. The hot plate is divided into the pickling plate and the unpickling plate.
Thickness |
0.12-6.0 mm |
Width |
600-1500mm |
Coil ID |
508/ 610 mm |
Zinc Coating |
Z 30-275 (g/m2) |
Spangle |
Zero spangle,Minimum spangle,regular spangle,big spangle |
Surface Treatment |
Chromated,skin pass,oiled,phosphating |
Coil weight |
3-10tons |