Galvanized steel coil Z275 DX51D
Galvanized coil, a thin steel sheet that is dipped into the molten zinc bath to make its surface adhere to a layer of zinc. At present, it is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously dipped in the bath with melted zinc to make galvanized steel plate; Alloyed galvanized steel sheet.
|
Capacity
|
about 15000 tons per month for the steel sheet and coil product
|
|
Grade
|
SGHC, SGCC, DX51D, Q195, all according to the customer’s request
|
|
Standard
|
JIS G3302 1998, ASTM A653M/A924M 2004, etc.
|
|
Thickness
|
from 0.12mm to 5.0mm, all available
|
|
Width
|
from 600mm to 1500mm, all available
|
|
Coil ID
|
508mm/610mm
|
|
Coil weight
|
from 2-10MT, according to the customer’s request
|
|
Zinc coating weight
|
30g/m2-600g/m2, double side
|
|
Spangle
|
big spangle, normal spangle, small spangle, non-spangle
|
|
Surface treatment
|
Chemical passivating, oils, passivating + oils
|
|
Edge
|
mill edge, cut edge
|
|
MOQ
|
Min trial order 10 ton each thickness, 1×20′ per delivery
|
Galvanized coil, a thin steel sheet that is dipped into the molten zinc bath to make its surface adhere to a layer of zinc. At present, it is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously dipped in the bath with melted zinc to make galvanized steel plate; Alloyed galvanized steel sheet. This kind of steel plate is also made by hot dip method, but it is heated to about 500 ℃ immediately after being out of the tank, so that it can form an alloy coating of zinc and iron.
FAQ
A: Generally it is 10 days if the goods are in stock. or it is 30 days if the goods are not in stock, it is according to quantity.
Q: DO YOU PROVIDE SAMPLES ? IS IT FREE OR EXTRA ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: WHAT IS YOUR TERMS OF PAYMENT ?
A: We accept LC and TT both.
