galvanized steel coil sgc400

Cold rolled steel is hot-rolled steel that has been cleaned of iron oxide scale (pickled) and reduced to a specific thickness through a series of rolling stands (tandem mill) or passed back and forth through a reversing rolling mill. The steel can be heated to controlled temperatures (annealing) depending on mechanical property requirements, and final rolled to the desired thickness.

Cold rolled steel coil is rolled at room temperature and then rolled again below its recrystallization temperature. This process enables better control over finished product shape, thickness, dimensions, and a more consistent finish.

Top quality JIS 0.45mm*1200mm galvanized steel coil can produce zero spangles, small spangles, ordinary spangles, etc. The thickness is from 0.125mm to 4.5mm, the width is from 500mm to 1250mm, the zinc coating is from 40-275 g/m², the surface is passivated and oil can be coated.

Galvanized Steel Coils Metal Roll has a wide range of applications, and its advantage is that it has a long anti-corrosion period. It is mainly used for home appliances, office panels, roof sheets, automotive panels, construction and substrate of prepainted steel coils.

Cold-rolled sheet coil has good properties, that is, cold-rolled strip and steel sheet with thinner thickness and higher precision can be obtained by cold-rolling, with high flatness, high surface finish, clean and bright surface of cold-rolled sheet, and easy to be coated. It has a wide range of processing and varieties, and has a wide range of uses.

Cold-rolled coils are a steel product produced by applying plastic deformation to hot-rolled steel on cold-rolling mills. With such processing, the product can have more accurate dimensional tolerances, better surface quality and improved mechanical properties as compared with hot-rolled coils. Cold rolling is also used to make thinner coils than hot-rolling mills can currently produce (less than 0.8-1.0 mm).

Galvanized steel cold rolled coil has a wide range of uses, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, food cans, etc., industrial panels, roofing and siding for painting, etc.

Cold-rolled steel is low-carbon hot-rolled steel that has been rolled at room temperature, below its recrystallization temperature. The steel is then cleaned of oxide scale and finished in a specific series of rolling to just over the desired thickness, heating to controlled temperatures, and final rolling to the desired thickness.

GNEE Steel is a cold rolled steel coil supplier that maintains a constant inventory of cold rolled steel grades most commonly used by our customers as referenced below.

cold rolled galvanized Steel Sheet & Plates, are intended for use where greater corrosion protection is required without painting.

Galvanized refers to a surface treatment technology that coats a layer of zinc on the surface of metals, alloys or other materials for aesthetics and rust prevention. The main methods used are hot-dip galvanizing and electro-galvanizing. It prevents corrosion of steel, and its protective performance is closely related to the thickness of the coating.

Factory Cold Rolled Steel Coil Full Hard galvanized Steel Coil immersing the thin steel plate in the molten zinc bath, and adhering a layer of zinc thin steel plate on the surface. It is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the zinc-melted plating tank to make galvanized steel plate; alloyed galvanized steel plate.

Metal Cold Rolled Galvanized Steel Coil is essentially hot rolled steel that is further processed in cold reduction materials. Here, the material is cooled followed by annealing and/or tempers rolling. Steels of different grades and specifications can be either hot or cold rolled.

Cold-rolled is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high.

The material composition of the product is mainly iron carbon alloy, generally containing a small amount of silicon,manganese, sulfur and phosphorus. Different brands correspond to different hardness, thermoplastic, plasticity and weldability. If you don’t understand, you can tell us your requirements.

This product is based on cold -rolled steel strip as substrate,after continuous hot-dip galvanizing process and produced products.It is an excellent resistance to atmospheric corrosion of coated steel,cold-rolled sheet coil after the galvanized can extend the service life for 15-20 years.