Galvanized Steel Coil Factory Cold Rolled JIS ASTM DX51D SGCC

Cold-rolled steel is low-carbon hot-rolled steel that has been rolled at room temperature, below its recrystallization temperature. The steel is then cleaned of oxide scale and finished in a specific series of rolling to just over the desired thickness, heating to controlled temperatures, and final rolling to the desired thickness.

Galvanized Steel Coils is specially designed steel sheets that are employed in several furbishing and manufacturing purposes.Steel coils are thin sheets that can be rolled up into incessant coils. The galvanized coil is employed outdoor, as it shows anti rusting tendencies. Most significantly, it is used in constructing strong roofing system.

Galvanized coil products are mainly used in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries. The construction industry is mainly used to manufacture anti-corrosion roof panels and roof grilles of industrial and civil buildings

Galvanized steel coil, immersing the thin steel plate in the molten zinc bath, and adhering a layer of zinc thin steel plate on the surface. It is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the zinc-melted plating tank to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also made by the hot-dip method, but it is heated to about 500 °C immediately after exiting the tank to form an alloy film of zinc and iron. This galvanized steel coil has good paint adhesion and weldability.

Top quality JIS 0.45mm*1200mm galvanized steel coil can produce zero spangles, small spangles, ordinary spangles, etc. The thickness is from 0.125mm to 4.5mm, the width is from 500mm to 1250mm, the zinc coating is from 40-275 g/m², the surface is passivated and oil can be coated.

This Customize Cold Rolled Galvanized Steel Coil Hc220bd is based on cold -rolled steel strip as substrate,after continuous hot-dip galvanizing process and produced products.It is an excellent resistance to atmospheric corrosion of coated steel,cold-rolled sheet coil after the galvanized can extend the service life for 15-20 years.

Dx51d Z40 Cold Rolled Galvanized Steel Strip Coil products are mainly used in construction, light industry, automobile, agriculture, animal husbandry and fishery and commerce industries. Among them, the construction industry is mainly used to manufacture anti-corrosion industrial and civil building roof panels, roof grilles, etc

Cold-rolled steel coils are made of hot-rolled coils and rolled at room temperature below the recrystallization temperature. Cold-rolled steel has good performance. That is, cold-rolled steel can be thinner and more precise.

Galvanized Steel coil is produced through applying Zn coat on both faces by hot dip process. It enjoys both the physical protective feature and the electrochemical protective property of Zn.

DX51D zinc cold rolled coated galvanized steel coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

Cold-rolled is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high.

Cold Rolled Galvanized Steel Coil has been well received by many customers and enjoyed a good reputation in many countries.Cold Rolled Galvanized Coil. Gnee is a leading manufacturer of metal materials