Galvanized steel coil dx53d z275
Galvanised coils, thin steel sheets that are dipped into a molten zinc bath so that a layer of zinc adheres to their surface. Mainly produced by the continuous galvanising process, whereby rolls of steel sheet are continuously dipped in a bath of molten zinc to make galvanised steel sheets; alloyed galvanised steel sheets.
|
Product Name
|
Galvanized Steel Coil
|
|
Material
|
Q235/Q195/Q235/Q345B/DB460/Q195-Q345 ASTM/AISI/SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z
|
|
Application
|
making pipes, cutting sheets, making small tools, making corrugated sheets, making container, making fences
|
|
Thickness
|
0.12-6.0mm/custom
|
|
Width
|
20-1500mm/custom
|
|
Zinc coating
|
Z40-600g/m2 or custom
|
|
coil weight
|
3-5 Tons or as requirment
|
|
Certificate
|
CE, BIS, JIS, GS, ISO9001:2015
|
|
Surface
|
Galvanized Coated
|
|
Surface Treatment
|
Coated, Galvanized, Clean, Blasting and Painting according to customer requirement
|
|
Spangle
|
Big spangle,Regular spangle,Mini spangle,Zero spangle
|
|
Payment terms
|
30%T/T Advance + 70% Balance before delivery.
|
|
Type
|
Steel Coil
|
Hot-dip galvanizing is the reaction of molten metal with an iron substrate to produce an alloy layer, thereby combining the substrate and the plating layer. Hot-dip galvanizing is to pickle iron and steel parts first. In order to remove iron oxide on the surface of iron and steel parts, after pickling, it is cleaned in an ammonium chloride or zinc chloride aqueous solution or a mixed solution of ammonium chloride and zinc chloride.And then sent to the hot-dip plating bath. Hot-dip galvanizing has the advantages of uniform coating, strong adhesion and long service life.
FAQ
1. How can I get a quotation from you?
You can leave us message, and we will reply every message in time. Or we may talk on line by Trade manager. And you can also find our contact information on contact page.
2. Can I get samples before order?
Yes, of course. Usually our samples are free. we can produce by your samples or technical drawings. We can build the molds and fixtures.
3. What is your delivery time?
The time of delivery is usually around 15-20 days. We can send out in 2 days, if it has stock.
4. What is your payment terms?
Our usual payment term is 30% deposit, and rest before delivery. L/C is also acceptable. EXW, FOB, CFR, CIF, DDU.
Our Email: info@gescosteel.com.
