G350 industry zinc coated cold rolled steel coil

Cold-rolled coil refers to a steel strip that is directly rolled into a certain thickness with a roll at room temperature and rolled into a whole coil with a coiler. Compared with hot-rolled coils, cold-rolled coils have a brighter surface and higher finish, but will generate more internal stress and are often annealed after cold-rolling.

Coils are divided into chilled coils and cold rolled coils. The difference between the two is that in appearance, the general chilled coil is slightly black; the surface quality, structure, and dimensional accuracy of the cold-rolled sheet are better than that of the chilled coil; in terms of performance, because the hot-rolled coil goes through the cold rolling process The directly obtained chilled coils undergo work hardening during cold rolling, resulting in an increase in yield strength and some residual internal stress, and the external performance is relatively “hard”, so it is called chilled coils.

ASTM Cold Rolled Dipped GI Galvanized Steel Coil GI Strip Coil is hot-rolled steel that has been cleaned of iron oxide scale (pickled) and reduced to a specific thickness through a series of rolling stands (tandem mill) or passed back and forth through a reversing rolling mill. The steel can be heated to controlled temperatures (annealing) depending on mechanical property requirements, and final rolled to the desired thickness.

Cold coil is made of hot rolled coil at room temperature and below the recrystallization temperature, including plate and coil, of which the sheet delivered is called steel plate, also known as box plate or plate; the long length and delivered in coil is called steel strip, also known as coil plate.

Galvanized coil products are mainly used in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries. The construction industry is mainly used to manufacture anti-corrosion roof panels and roof grilles of industrial and civil buildings; The light industry uses it to manufacture household appliance shells, civil chimneys, kitchen appliances, etc.

JSC270E zinc coated cold rolled Galvanized Steel Coil  is a kind of steel coil that immersed in the dissolved zinc bath to adhere to the surface with a layer of zinc. At present, the main method is to make galvanized steel coil be dipped in a bath with dissolved zinc.

Using hot-rolled steel coil as raw material, after pickling to remove oxide scale, cold continuous rolling is carried out, and the finished product is rolled hard coil. The cold work hardening caused by continuous cold deformation increases the strength, hardness and toughness and plastic index of rolled hard coil.

It is produced through a process of metal coating which involves passing cold rolled coils through a zinc pot. The process ensures the adherence of zinc to the surface of steel sheet.The zinc layer provides excellent corrosion resistance so that it can prolong the service life of the product.

Cold-rolled coils are a steel product produced by applying plastic deformation to hot-rolled steel on cold-rolling mills. With such processing, the product can have more accurate dimensional tolerances, better surface quality and improved mechanical properties as compared with hot-rolled coils. Cold rolling is also used to make thinner coils than hot-rolling mills can currently produce (less than 0.8-1.0 mm).