Dx51d Gi Metal Spangle Zinc Coated cold rolled Galvanized Steel Coil

Gnee‘s Cold Rolled Galvanized Steel Coil can be found in a multitude of products that range from washing machines, refrigerators, flashing, duct-work, car parts, drum containers, decking, HVAC systems, and much more.

Galvanized steel cold rolled coil has a wide range of uses, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, food cans, etc., industrial panels, roofing and siding for painting, etc.

Cold rolled coil could supply better control of thickness, shape, width, surface finish, and other special quality features that compliment the emerging need for highly engineered end uses. Take construction projets for example: steel sheds, industrial buildings, and garages.

Galvanized steel coil refers to rolled coil steel product that has been cleansed and heated before it is dipped into molten zinc. The hot-rolled or cold-rolled steel strip, sheet, or slab can be coated with zinc and iron (GA) or zinc (GI).

cold rolled zinc coated g120 galvanized steel coil is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high.

Cold Rolled Steel Coil have good properties, and cold-rolled strips and steel sheets with thinner thickness and higher precision can be obtained by cold-rolling.

Cold-rolled sheet coil has good properties, that is, cold-rolled strip and steel sheet with thinner thickness and higher precision can be obtained by cold-rolling, with high flatness, high surface finish, clean and bright surface of cold-rolled sheet, and easy to be coated. It has a wide range of processing and varieties, and has a wide range of uses.

Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate. The hot plate is divided into the pickling plate and the unpickling plate.

Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate.