DX51 Cold rolled Galvanized Steel Coil

Galvanized steel coil has a wide range of applications, and its advantage is that it has a long anti-corrosion period. It is mainly used for home appliances, office panels, roof sheets, automotive panels, construction and substrate of prepainted steel coils.

Cold-rolled sheet in coil form is produced by removing rust from hot-rolled sheet by “pickling” it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll.

High Quality Crca Sheet for Construction SPCC steel coil is specially designed steel sheets that are employed in several furbishing and manufacturing purposes .Steel coils are thin sheets that can be rolled up into incessant coils. The galvanized coil is employed outdoor, as it shows anti rusting tendencies. Most significantly, it is used in constructing strong roofing system.

Cold-rolled strips are widely used, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, canned food, etc. Cold-rolled sheet is the abbreviation of ordinary carbon structural steel cold-rolled sheet, also known as cold-rolled sheet, commonly known as cold-rolled sheet, and sometimes mistakenly written as cold-rolled sheet.

Cold-rolled galvanized sheet is a kind of galvanized steel sheet. Steel sheets are classified into two types: hot-rolled and cold-rolled. Cold-rolled sheet is flat, rectangular, and can be directly rolled. Cold rolling is a steel sheet in which the steel sheet is further thinned to a target thickness at room temperature.

Coils are divided into chilled coils and cold rolled coils. The difference between the two is that in appearance, the general chilled coil is slightly black; the surface quality, structure, and dimensional accuracy of the cold-rolled sheet are better than that of the chilled coil; in terms of performance, because the hot-rolled coil goes through the cold rolling process The directly obtained chilled coils undergo work hardening during cold rolling, resulting in an increase in yield strength and some residual internal stress, and the external performance is relatively “hard”, so it is called chilled coils.

Gnee‘s Cold Rolled Galvanized Steel Coil can be found in a multitude of products that range from washing machines, refrigerators, flashing, duct-work, car parts, drum containers, decking, HVAC systems, and much more.

Cold rolled steel is hot-rolled steel that has been cleaned of iron oxide scale (pickled) and reduced to a specific thickness through a series of rolling stands (tandem mill) or passed back and forth through a reversing rolling mill. The steel can be heated to controlled temperatures (annealing) depending on mechanical property requirements, and final rolled to the desired thickness.

Cold rolled coil could supply better control of thickness, shape, width, surface finish, and other special quality features that compliment the emerging need for highly engineered end uses. Take construction projets for example: steel sheds, industrial buildings, and garages.

A36 Prime 10# Mild Cold Rolled Steel Coil is made of hot-rolled coils and rolled at room temperature below the recrystallization temperature. Cold-rolled steel has good performance. That is, cold-rolled steel can be thinner and more precise.