Cold-rolled steel coils use

Cold rolled coil could supply better control of thickness, shape, width, surface finish, and other special quality features that compliment the emerging need for highly engineered end uses. Take construction projets for example: steel sheds, industrial buildings, and garages.

The material composition of the product is mainly iron carbon alloy, generally containing a small amount of silicon,manganese, sulfur and phosphorus. Different brands correspond to different hardness, thermoplastic, plasticity and weldability. If you don’t understand, you can tell us your requirements.

GNEE Steel is a cold rolled steel coil supplier that maintains a constant inventory of cold rolled steel grades most commonly used by our customers as referenced below.

Cold rolled coil could supply better control of thickness, shape, width, surface finish, and other special quality features that compliment the emerging need for highly engineered end uses. Take construction projets for example: steel sheds, industrial buildings, and garages.

ASTM Cold Rolled Dipped GI Galvanized Steel Coil GI Strip Coil is hot-rolled steel that has been cleaned of iron oxide scale (pickled) and reduced to a specific thickness through a series of rolling stands (tandem mill) or passed back and forth through a reversing rolling mill. The steel can be heated to controlled temperatures (annealing) depending on mechanical property requirements, and final rolled to the desired thickness.

Cold-rolled steel is low-carbon hot-rolled steel that has been rolled at room temperature, below its recrystallization temperature. The steel is then cleaned of oxide scale and finished in a specific series of rolling to just over the desired thickness, heating to controlled temperatures, and final rolling to the desired thickness.

Galvanized steel is defined as a carbon steel sheet coated with zinc on both sides.Galvanized steel coils are widely used in the construction industry, as raw material for the production of corrugated panels, fencing products, drywall panel profiles, ventilation systems etc. Recommended for both outside and inside usage, galvanized steel has a high resistance to corrosion in different environments, due to a protective layer of zinc of 30 – 275 grams per squaremeter

Galvanized Steel coil is produced through applying Zn coat on both faces by hot dip process. It enjoys both the physical protective feature and the electrochemical protective property of Zn.

Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate.