Cold rolled steel coil  SPCE SPCG

This product is based on cold -rolled steel strip as substrate,after continuous hot-dip galvanizing process and produced products.It is an excellent resistance to atmospheric corrosion of coated steel,cold-rolled sheet coil after the galvanized can extend the service life for 15-20 years.

DX51D zinc cold rolled coated galvanized steel coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

It is produced through a process of metal coating which involves passing cold rolled coils through a zinc pot. The process ensures the adherence of zinc to the surface of steel sheet.The zinc layer provides excellent corrosion resistance so that it can prolong the service life
of the product.

The steel coil is a product of rolling and winding a piece of steel strip or steel sheet. The width of a steel coil is larger compared to its thickness. The method of producing steel coil is based on how it should be classified, whether as a cold-rolled, galvanized or hot rolled steel coil.

Galvanized steel coil–Dip a sheet of zinc into a molten zinc bath so that galvanized steel coil’s surface adheres to a sheet of zinc.At present, galvanized steel coil’s main use of continuous galvanized process production, that is, the coil of steel plate continuously immersed in the melting zinc plating tank made of galvanized steel plate;Alloyed galvanized steel sheet.

Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

Cold-rolled steel is low-carbon hot-rolled steel that has been rolled at room temperature, below its recrystallization temperature. The steel is then cleaned of oxide scale and finished in a specific series of rolling to just over the desired thickness, heating to controlled temperatures, and final rolling to the desired thickness.

Cold Rolled Steel Coil SPCC/SPCD/SPCE/SPCF/SPCG are a steel product produced by applying plastic deformation to hot-rolled steel on cold-rolling mills.

Cold coil is made of hot rolled coil at room temperature and below the recrystallization temperature, including plate and coil, of which the sheet delivered is called steel plate, also known as box plate or plate; the long length and delivered in coil is called steel strip, also known as coil plate.

Galvanized Steel Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics. Usually, hot-dipped galvanized steel sheet and galvanized steel coil process and specifications are basically the same.

cold rolled zinc coated g120 galvanized steel coil is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high.