Cold rolled steel coil EN 10130-1999

High Quality Crca Sheet for Construction SPCC steel coil is specially designed steel sheets that are employed in several furbishing and manufacturing purposes .Steel coils are thin sheets that can be rolled up into incessant coils. The galvanized coil is employed outdoor, as it shows anti rusting tendencies. Most significantly, it is used in constructing strong roofing system.

A36 Prime 10# Mild Cold Rolled Steel Coil is made of hot-rolled coils and rolled at room temperature below the recrystallization temperature. Cold-rolled steel has good performance. That is, cold-rolled steel can be thinner and more precise.

Cold-rolled coils are widely used, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, canned food, etc. Cold-rolled sheet is the abbreviation of ordinary carbon structural steel cold-rolled sheet, also known as cold-rolled sheet, commonly known as cold-rolled sheet, and sometimes mistakenly written as cold-rolled sheet. The cold plate is a hot-rolled steel strip of ordinary carbon structural steel, which is further cold-rolled into a steel plate with a thickness of less than 4mm.

Gnee‘s Cold Rolled Galvanized Steel Coil can be found in a multitude of products that range from washing machines, refrigerators, flashing, duct-work, car parts, drum containers, decking, HVAC systems, and much more.

Good Quality Cold Rolled Steel zinc Coil is mainly used in the construction of household appliances, automobile containers, especially steel structure building, automobile parts, steel plate warehouse manufacturing and other industries. Their characteristics are mainly: strong corrosion resistance, good surface quality, economic and practical.

Cold rolled steel is hot-rolled steel that has been cleaned of iron oxide scale (pickled) and reduced to a specific thickness through a series of rolling stands (tandem mill) or passed back and forth through a reversing rolling mill. The steel can be heated to controlled temperatures (annealing) depending on mechanical property requirements, and final rolled to the desired thickness.

For galvanized steel coils, the steel sheet is immersed in a molten zinc bath to make a sheet of zinc coated on its surface. It is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously immersed in a plating tank with zinc melted to make galvanized steel plate; alloyed galvanized steel plate.

Cold-rolled galvanized sheet is a kind of galvanized steel sheet. Steel sheets are classified into two types: hot-rolled and cold-rolled. Cold-rolled sheet is flat, rectangular, and can be directly rolled. Cold rolling is a steel sheet in which the steel sheet is further thinned to a target thickness at room temperature.

DX51D zinc cold rolled coated galvanized steel coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

Dx51d Gi Metal Spangle Zinc Coated cold rolled Galvanized Steel Coil are successfully used in industries with stringent requirements for corrosion resistance, durability, strength and appearance, and can be formed or have various coatings applied.

The process of cold rolling increasing the SGCC DX51D ZINC Cold rolled coil’s strength and hardness, while decreasing its ductility.