cold-rolled roughness coil--GNEE(TIANJIN)MULTINATIONAL TRADE CO.,LTD

Large steel billets are heated until they reach a temperature of more than 1700 degrees Fahrenheit. The steel is flattened using industrial rollers and wound into large coils. As the steel cools to...

Large steel cold coil

Product Name JIS G3141 SPCEN Deep Drawing Quality Annealed Cold rolled steel coil Grade DC01, DC02, DC03, DC04, ST12, ST13, ST14, ST15, SPCC, SPCD, SPCE,SPCEN, Q195,Q215,Q235,08AL ...

JIS G3141 SPCEN Deep Drawing Quality Annealed Cold rolled steel coil

The table below shows the approximate mechanical properties corresponding to the five commercial tempers of cold-rolled carbon steel strip. This table is presented as a matter of general informatio...

specifically cold sheet

The table below shows the approximate mechanical properties corresponding to the five commercial tempers of cold-rolled carbon steel strip. This table is presented as a matter of general informatio...

commercial temper cold sheet

Electrical steel (silicon steel coil) is mainly divided into two categories: grain-oriented electrical steel and grain non-oriented electrical steel.

CRGO 30QG100 Silicon Electric Steel Coil

Steel that has been pickled and oiled has the same material properties as straight hot rolled steel but is cleaner to work with and easier to clean for painting.

material cold plate steel

Cold rolled steels are generally not available in a high carbon content form because the increase in hardness that carbon gives to steel makes them difficult to form at room temperatures. A cold r...

high carbon content cold sheet

This selection of steel sheets and plates is cold rolled, meaning these products have improved surfaces, greater uniformity in thickness, and better mechanical properties than hot rolled steel. Its...

uniformity steel cold plate

Galvanized steel coil is a kind of steel coil that immersed in the dissolved zinc bath to adhere to the surface with a layer of zinc. At present, the main method is to make galvanized steel coil be dipped in a bath with dissolved zinc.

GI galvanized steel coil 0.2mm thick cold rolled galvanized steel coil

Dx51d Z40 Cold Rolled Galvanized Steel Strip Coil products are mainly used in construction, light industry, automobile, agriculture, animal husbandry and fishery and commerce industries. Among them...

Dx51d Z40 Cold Rolled Galvanized Steel Strip Coil

HDGI 0.2mm Thickness Galvanized Steel Coil Can be used for air conditioning equipment, HVAC ductwork, wood connectors, slot machine parts, computer cabinets, TV cable boxes, building panels, displa...

HDGI 0.2mm Thickness Galvanized Steel Coil

Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate.

high quality galvanized steel cold rolled steel coil

12 Gauge Thickness Cold-rolled Metal Steel Coil is represented by cold- and hot-rolled coils with a zinc coating, which helps to protect the steel against atmospheric corrosion. Galvanised steel coils are successfully used in industries with stringent requirements for corrosion resistance, durability, strength and appearance, and can be formed or have various coatings applied.

12 Gauge Thickness Cold-rolled Metal Steel Coil

Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate. The hot plate is divided into the pickling plate and the unpickling plate.

GI galvanized steel 0.2mm thick cold rolled galvanized coil

Steel plates and sheets are some of the most useful materials to have on a construction site. Their strength and durability are assets that can be appreciated by anyone who has ever built a structu...

Steel plates and sheets

Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to t...

Cold Rolled Electro Galvanized GI Steel Coils

For Galvanized Steel Coils, the thin Steel Plate is immersed in the molten zinc bath to adhere a layer of zinc thin steel plate on the surface. Seamless steel pipes are mainly produced by continuou...

Zinc Coated Cold Rolled Galvanised Steel Coils

As the steel has cooled down, it shrinks unevenly, which offers less control of the entire shape and size of the hot-rolled steel coil.

unevenly cold coil

The typical mechanical property values presented here are nonmandatory. They are provided to assist the purchaser in specifying a suitable steel for a given application. Values outside of these ran...

typical mechanical cold rolled plate

While both are formed using the same process and are longer and wider than they are thick, they do differ in just how thick they are. With steel, anything less than about 3 mm or ⅛ inch in thicknes...

cold rolled steel sheet mechanical

Cold rolled steel is steel which has been rolled at room temperature, below its recrystallization temperature. Compare with hot rolled steel sheet, the thickness of cold rolled steel sheet is more ...

treatment processing cold plate

Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate.

factory direct supply galvanized cold rolled steel coil g60 for roofing tiles

For galvanized steel coils, the steel sheet is immersed in a molten zinc bath to make a sheet of zinc coated on its surface. It is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously immersed in a plating tank with zinc melted to make galvanized steel plate; alloyed galvanized steel plate.

cold rolled steel galvanized cold rolled coil

Cold rolled sheet products have been available for many years and are used for a multitude of applications such as appliances – refrigerators, washers, dryers, and other small appliances, automobil...

Cold rolled sheet

Cold rolled steel coil EN 10130-1999 used in applications that require improved strength, rigidity, flexibility and surface appearance for the treatments described above. The fields of Cold rolled ...

Cold rolled steel coil EN 10130-1999

A roll or sheet of hot-rolled steel is dipped or passed through a pickling bath. A solution of very strong acid removes the scale and dirt from the sheet or plate, leaving the raw steel exposed. It...

raw steel cold sheet

Q/BQB 402-1999 cold rolled galvanized steel is manufactured based on hot-rolled steel and rolling at room temperature and under the recrystallization temperature. GNEE can supply high quality Q/BQB...

Q/BQB 402-1999 cold rolled galvanized steel

Steel plates and sheets are some of the most useful materials to have on a construction site. Their strength and durability are assets that can be appreciated by anyone who has ever built a structu...

useful cold steel plate

This product is manufactured for a large number of applications that require a variety of properties from fairly simple to very sophisticated. The product is typically available at thickness as low...

application cold sheet

GI galvanized steel coil z275 zinc sheet metal steel coil(GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

GI galvanized steel coil z275 zinc sheet metal steel coil

After the hot-dip galvanized steel sheet is pulled out of the zinc pot, the appearance of the crystal grains formed as the zinc layer cools and solidifies is called spangles. The size, brightness a...

Cold rolled Z275 Galvanized Steel coil

Cold-rolled steel is simply hot-rolled steel with additional processing to make it a smoother and more versatile material. Cold rolled steel is a versatile sheet metal product formed by passing a s...

additional cold sheet

Surface Finish: Symbol Remarks Dull finish D A matt finish produced with a roll roughened its surface mechanically or chemically. Bright finish B A smooth finish produced wi...

Cold-rolled steel coil material

Silicon steel is an extremely low-carbon ferrosilicon alloy material with a silicon content of 0.5% to 4.5%. Silicon steel has the characteristics of high magnetic permeability, low coercivity, and...

Cold Rolled Steel Coil

Cold-rolled steel coils are made of hot-rolled coils and rolled at room temperature below the recrystallization temperature. Cold-rolled steel has good performance. That is, cold-rolled steel can be thinner and more precise.

Z275 High Strength Galvanized S350gd Metal Cold Rolled Steel Coil

Cold rolled crosscut	Plate thickness	Plate width	Processing length	Diagonal tolerance	Dimension precision	Allowable coil weight
	0.2-0.6	90-1800	200-6000	±0.5/2000	±0.3/2000	20
	0.6-1.0	90-1800	200-6000	±0.5/2000	±0.5/2000	25
	1.0-2.0	90-1800	200-6000	±1/2000	±0.8/2000	35
	2.0-4.0	150-1800	200-12000	±1/2000	±0.8/2000	35
	4.0-6.0	200-2000	400-12000	±1.5/2000	±1.0/2000	35