cold rolled prime spcc hot dipped galvanized steel coils

Cold-rolled coil refers to a steel strip that is directly rolled into a certain thickness with a roll at room temperature and rolled into a whole coil with a coiler. Compared with hot-rolled coils, cold-rolled coils have a brighter surface and higher finish, but will generate more internal stress and are often annealed after cold-rolling.

Galvanized coil products are mainly used in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries. The construction industry is mainly used to manufacture anti-corrosion roof panels and roof grilles of industrial and civil buildings

Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

Cold-rolled coils are a steel product produced by applying plastic deformation to hot-rolled steel on cold-rolling mills. With such processing, the product can have more accurate dimensional tolerances, better surface quality and improved mechanical properties as compared with hot-rolled coils. Cold rolling is also used to make thinner coils than hot-rolling mills can currently produce (less than 0.8-1.0 mm).

Cold-rolled steel is low-carbon hot-rolled steel that has been rolled at room temperature, below its recrystallization temperature. The steel is then cleaned of oxide scale and finished in a specific series of rolling to just over the desired thickness, heating to controlled temperatures, and final rolling to the desired thickness.

Galvanized Steel Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics. Usually, hot-dipped galvanized steel sheet and galvanized steel coil process and specifications are basically the same.

Cold rolled steel coil is rolled at room temperature and then rolled again below its recrystallization temperature. This process enables better control over finished product shape, thickness, dimensions, and a more consistent finish.

The DC04 galvanized sheet metal coil Cold Rolled steel coil is packed with PVC film or water-proof kraft in the first layer, the second layer is iron sheet package, then wrapped on the metal pallet or metal square tube with steel strip. It’s is water-proof and sea-worthy, and warmly welcomed by the customers. OEM accepted, besides, the pakage can also be according to your demands.

Cold rolled coil could supply better control of thickness, shape, width, surface finish, and other special quality features that compliment the emerging need for highly engineered end uses. Take construction projets for example: steel sheds, industrial buildings, and garages.

The hot plate is divided into the pickling plate and the unpickling plate. The surface of the pickling plate becomes the normal metal color because of pickling, but the surface of the unsold-rolled plate is not as high as that of the cold-rolled plate, or the existence of ferrosoferric oxide layer, colloquially it is fire-roasted, and if the storage environment is not good, usually with a little embroidery.

The material composition of the product is mainly iron carbon alloy, generally containing a small amount of silicon,manganese, sulfur and phosphorus. Different brands correspond to different hardness, thermoplastic, plasticity and weldability. If you don’t understand, you can tell us your requirements.