Cold rolled DX54D galvanized steel coil

Galvanized steel coil refers to rolled coil steel product that has been cleansed and heated before it is dipped into molten zinc. The hot-rolled or cold-rolled steel strip, sheet, or slab can be coated with zinc and iron (GA) or zinc (GI).

Gnee steel Supply cold-rolled steel coils, cold-rolled steel plates, cold-rolled steel strips,etc. Welcome friends from all over the world to purchase!

This Customize Cold Rolled Galvanized Steel Coil Hc220bd is based on cold -rolled steel strip as substrate,after continuous hot-dip galvanizing process and produced products.It is an excellent resistance to atmospheric corrosion of coated steel,cold-rolled sheet coil after the galvanized can extend the service life for 15-20 years.

Cold-rolled is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high. It must be annealed to restore its mechanical properties, and those without annealing are called hard rolled coils.

Galvanized Steel Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics. Usually, hot-dipped galvanized steel sheet and galvanized steel coil process and specifications are basically the same.

Cold rolled steel coil is a type of steel coil product developed from hot rolled steel coil and sheet, surface quality and dimension precision are quite low after hot rolling process, it can’t be used where surface quality and dimensions are required. Until now, cold rolled coils have been available and successfully used for a variety of applications.

Cold-rolled coil refers to a steel strip that is directly rolled into a certain thickness with a roll at room temperature and rolled into a whole coil with a coiler. Compared with hot-rolled coils, cold-rolled coils have a brighter surface and higher finish, but will generate more internal stress and are often annealed after cold-rolling.

Cold rolled coil could supply better control of thickness, shape, width, surface finish, and other special quality features that compliment the emerging need for highly engineered end uses. Take construction projets for example: steel sheds, industrial buildings, and garages.