Cold Rolled ASTM SUS JIS Mirror Finish zinc Steel Coil

Cold-rolled sheet coil has good properties, that is, cold-rolled strip and steel sheet with thinner thickness and higher precision can be obtained by cold-rolling, with high flatness, high surface finish, clean and bright surface of cold-rolled sheet, and easy to be coated. It has a wide range of processing and varieties, and has a wide range of uses.

cold rolled galvanized Steel Sheet & Plates, are intended for use where greater corrosion protection is required without painting.

Cold-rolled sheet coil has good properties, that is, cold-rolled strip and steel sheet with thinner thickness and higher precision can be obtained by cold-rolling, with high flatness, high surface finish, clean and bright surface of cold-rolled sheet, and easy to be coated. It has a wide range of processing and varieties, and has a wide range of uses.

SPCC Cold Rolled Steel Coil It is rolled at room temperature, below its recrystallization temperature, which will increase the steel strength and hardness, and also make its surface smooth. As a leading cold rolled steel coil manufacturer, Gnee Steel develops and offers a wide range of steel products with different sizes, finishes, designs to meet our customers’ needs. Welcome to talk with us about your project.

Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics. Usually, hot-dipped galvanized steel sheet and galvanized steel coil process and specifications are basically the same.Galvanizing is the process of applying a protective zinc coating to a steel sheet or iron sheet, to prevent rusting.

Galvanized steel coil–Dip a sheet of zinc into a molten zinc bath so that galvanized steel coil’s surface adheres to a sheet of zinc.At present, galvanized steel coil’s main use of continuous galvanized process production, that is, the coil of steel plate continuously immersed in the melting zinc plating tank made of galvanized steel plate;Alloyed galvanized steel sheet.

Coils are divided into chilled coils and cold rolled coils. The difference between the two is that in appearance, the general chilled coil is slightly black; the surface quality, structure, and dimensional accuracy of the cold-rolled sheet are better than that of the chilled coil; in terms of performance, because the hot-rolled coil goes through the cold rolling process The directly obtained chilled coils undergo work hardening during cold rolling, resulting in an increase in yield strength and some residual internal stress, and the external performance is relatively “hard”, so it is called chilled coils.

Using hot-rolled steel coil as raw material, after pickling to remove oxide scale, cold continuous rolling is carried out, and the finished product is rolled hard coil. The cold work hardening caused by continuous cold deformation increases the strength, hardness and toughness and plastic index of rolled hard coil. , so the stamping performance will deteriorate and can only be used for parts with simple deformation.

Galvanized steel is defined as a carbon steel sheet coated with zinc on both sides.Galvanized steel coils are widely used in the construction industry, as raw material for the production of corrugated panels, fencing products, drywall panel profiles, ventilation systems etc. Recommended for both outside and inside usage, galvanized steel has a high resistance to corrosion in different environments, due to a protective layer of zinc of 30 – 275 grams per squaremeter

Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate.

The company has has a large number of aluminum alloy, steel pipe, square pipe, steel plate, steel coil, bar, H-shaped steel and other stocks, in line with GB standards, ASTM, JIS, BS, EM. Provide customers with a variety of steel products, ultra-fast delivery. Specializing in OEM custom processing services, flame cutting, laser cutting and rhinestone cutting services. Provides steel bending services, steel heat treatment, steel processing services, steel welding services and sheet metal processing services; special specifications, special grades, small batches, ultra-high speed delivery, short delivery times.

Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.