cold rolled A36 Q235 Q195 steel coil

cold rolled high quality Galvanized Steel Coil is also used to make wrought iron gates and other items,high tension electrical towers, protective gears, highway signs,make metal pails,build houses,etc.

Cold-rolled sheet in coil form is produced by removing rust from hot-rolled sheet by “pickling” it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll.

Cold rolled steel coil is a type of steel coil product developed from hot rolled steel coil and sheet, surface quality and dimension precision are quite low after hot rolling process, it can’t be used where surface quality and dimensions are required. Until now, cold rolled coils have been available and successfully used for a variety of applications.

g20 cold rolled high quality Galvanized Steel Coil composition by weight ratio of 55% aluminum,43.4% zinc,1.6% silicon, at high temperature 600 high temperature solidification and aluminized zinc plate surface is a unique smooth flat gorgeous star flower, the base color is silver white special coating structure makes it has excellent corrosion resistance

Galvanized refers to a surface treatment technology that coats a layer of zinc on the surface of metals, alloys or other materials for aesthetics and rust prevention. The main methods used are hot-dip galvanizing and electro-galvanizing. It prevents corrosion of steel, and its protective performance is closely related to the thickness of the coating.

Cold-rolled is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high. It must be annealed to restore its mechanical properties, and those without annealing are called hard rolled coils. Hard-rolled coils are generally used to make products that do not require bending or stretching, and those with a thickness of less than 1.0 are rolled on both sides or four sides with good luck.

High flatness, high surface finish, clean and bright surface of Cold rolled steel coil strip.

The process of cold rolling increasing the SGCC DX51D ZINC Cold rolled coil’s strength and hardness, while decreasing its ductility.

GNEE Steel is a cold rolled steel coil supplier that maintains a constant inventory of cold rolled steel grades most commonly used by our customers as referenced below.

GI galvanized steel coil z275 zinc sheet metal steel coil(GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

Ral7016 Dx51d PPGI Gi cold rolled Steel Coil is produced through a process of metal coating which involves passing cold rolled coils through a zinc pot. The process ensures the adherence of zinc to the surface of steel sheet.The zinc layer provides excellent corrosion resistance so that it can prolong the service life of the product.

The steel coil is a product of rolling and winding a piece of steel strip or steel sheet. The width of a steel coil is larger compared to its thickness. The method of producing steel coil is based on how it should be classified, whether as a cold-rolled, galvanized or hot rolled steel coil.