cold rolled 28 gauge dx51d galvanized steel coil

Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate. The hot plate is divided into the pickling plate and the unpickling plate.

The steel coil is a product of rolling and winding a piece of steel strip or steel sheet. The width of a steel coil is larger compared to its thickness. The method of producing steel coil is based on how it should be classified, whether as a cold-rolled, galvanized or hot rolled steel coil.

Galvalume Coil composition by weight ratio of 55% aluminum,43.4% zinc,1.6% silicon, at high temperature 600 high temperature solidification and aluminized zinc plate surface is a unique smooth flat gorgeous star flower, the base color is silver white special coating structure makes it has excellent corrosion resistance

It is mainly used in the fields of construction, automobile, container, transportation and home appliances. Especially steel structure construction, automobile manufacturing, steel plate manufacturing and other industries.

Cold rolled steel coil is rolled at room temperature and then rolled again below its recrystallization temperature. This process enables better control over finished product shape, thickness, dimensions, and a more consistent finish.

Cold-rolled is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high. It must be annealed to restore its mechanical properties, and those without annealing are called hard rolled coils. Hard-rolled coils are generally used to make products that do not require bending or stretching, and those with a thickness of less than 1.0 are rolled on both sides or four sides with good luck.

Dx51d Gi Roll cold rolled Zinc Coated Galvanized Steel Coil are widely used, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, canned food, etc. Cold-rolled sheet is the abbreviation of ordinary carbon structural steel cold-rolled sheet, also known as cold-rolled sheet, commonly known as cold-rolled sheet, and sometimes mistakenly written as cold-rolled sheet. The cold plate is a hot-rolled steel strip of ordinary carbon structural steel, which is further cold-rolled into a steel plate with a thickness of less than 4mm.

Cold-rolled sheet in coil form is produced by removing rust from hot-rolled sheet by “pickling” it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll.

Galvalume Coil composition by weight ratio of 55% aluminum,43.4% zinc,1.6% silicon, at high temperature 600 high temperature solidification and aluminized zinc plate surface is a unique smooth flat gorgeous star flower, the base color is silver white special coating structure makes it has excellent corrosion resistance

Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics. Usually, hot-dipped galvanized steel sheet and galvanized steel coil process and specifications are basically the same.Galvanizing is the process of applying a protective zinc coating to a steel sheet or iron sheet, to prevent rusting.

Cold rolled galvanized steel coil
It is cold-rolled or hot-rolled, long and narrow long steel plate is coated with a layer of raw materials called (zinc, aluminum) to varying degrees. Hot-dip galvanizing has the advantages of uniform coating, strong adhesion and long service life. The hot-dip galvanized strip steel matrix undergoes a complex physical and chemical reaction with the molten plating solution to form a corrosion-resistant zinc-iron alloy layer with a compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, its corrosion resistance is strong.

Cold-rolled steel coils have good properties, and cold-rolled strips and steel sheets with thinner thickness and higher precision can be obtained by cold-rolling. High flatness, high surface finish, clean and bright surface of cold-rolled sheet. It is easy to be coated and processed and has the characteristics of high stamping performance and low yield point, so cold-rolled steel coil has a wide range of uses, mainly used in automobiles and building materials. At the same time, it is also the substrate for the production of galvanized steel sheets in coil and galvalume steel coil.