build material prepainted gi steel cold rolled coil

Coils are divided into chilled coils and cold rolled coils. The difference between the two is that in appearance, the general chilled coil is slightly black; the surface quality, structure, and dimensional accuracy of the cold-rolled sheet are better than that of the chilled coil; in terms of performance, because the hot-rolled coil goes through the cold rolling process The directly obtained chilled coils undergo work hardening during cold rolling, resulting in an increase in yield strength and some residual internal stress, and the external performance is relatively “hard”, so it is called chilled coils.

ASTM Cold Rolled Dipped GI Galvanized Steel Coil GI Strip Coil is hot-rolled steel that has been cleaned of iron oxide scale (pickled) and reduced to a specific thickness through a series of rolling stands (tandem mill) or passed back and forth through a reversing rolling mill. The steel can be heated to controlled temperatures (annealing) depending on mechanical property requirements, and final rolled to the desired thickness.

Galvanized Steel coil is produced through applying Zn coat on both faces by hot dip process. It enjoys both the physical protective feature and the electrochemical protective property of Zn.

Cold Rolled zinc Steel Sheet steel coil Galvanized Steel Sheet is defined as a carbon steel sheet coated with zinc on both sides.

Galvanized Steel Coils is specially designed steel sheets that are employed in several furbishing and manufacturing purposes.Steel coils are thin sheets that can be rolled up into incessant coils. The galvanized coil is employed outdoor, as it shows anti rusting tendencies. Most significantly, it is used in constructing strong roofing system.

Cold-rolled sheet in coil form is produced by removing rust from hot-rolled sheet by “pickling” it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll.

Cold rolled coil could supply better control of thickness, shape, width, surface finish, and other special quality features that compliment the emerging need for highly engineered end uses. Take construction projets for example: steel sheds, industrial buildings, and garages.

This Customize Cold Rolled Galvanized Steel Coil Hc220bd is based on cold -rolled steel strip as substrate,after continuous hot-dip galvanizing process and produced products.It is an excellent resistance to atmospheric corrosion of coated steel,cold-rolled sheet coil after the galvanized can extend the service life for 15-20 years.

Cold-rolled steel coils are made of hot-rolled coils and rolled at room temperature below the recrystallization temperature. Cold-rolled steel has good performance. That is, cold-rolled steel can be thinner and more precise.

Cold-rolled galvanized sheet is a kind of galvanized steel sheet. Steel sheets are classified into two types: hot-rolled and cold-rolled. Cold-rolled sheet is flat, rectangular, and can be directly rolled. Cold rolling is a steel sheet in which the steel sheet is further thinned to a target thickness at room temperature. Compared with hot-rolled steel sheet, cold-rolled steel sheet has more accurate thickness, smooth and beautiful surface, and also has various superior mechanical properties, especially in terms of processability.

The current main products are covering Steel coil Cold rolled steel Metal roofing sheet steel coil,Cold Rolled series (coils/sheets), Metallic Coated series (GI,GL,galvanized, galvalumed, aluzinc, zincalume), Color Coated series (PPGI,PPGL) and their derivatives (Corrugated,Trapezoidal, Roofing sheets and Cladding),ASP ROOF.

Cold-rolled sheet in coil form is produced by removing rust from hot-rolled sheet by “pickling” it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll.