5mm Thick Cold Rolled 10# 20# Galvanized Steel Coil

The hot plate is divided into the pickling plate and the unpickling plate. The surface of the pickling plate becomes the normal metal color because of pickling, but the surface of the unsold-rolled plate is not as high as that of the cold-rolled plate, or the existence of ferrosoferric oxide layer, colloquially it is fire-roasted, and if the storage environment is not good, usually with a little embroidery.

Galvanized Steel Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics. Usually, hot-dipped galvanized steel sheet and galvanized steel coil process and specifications are basically the same.

Galvanized steel cold rolled coil has a wide range of uses, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, food cans, etc., industrial panels, roofing and siding for painting, etc.

Cold-rolled is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high. It must be annealed to restore its mechanical properties, and those without annealing are called hard rolled coils.

Cold-rolled coil refers to a steel strip that is directly rolled into a certain thickness with a roll at room temperature and rolled into a whole coil with a coiler. Compared with hot-rolled coils, cold-rolled coils have a brighter surface and higher finish, but will generate more internal stress and are often annealed after cold-rolling.

cold rolled zinc coated g120 galvanized steel coil is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high.

Cold-rolled steel is low-carbon hot-rolled steel that has been rolled at room temperature, below its recrystallization temperature. The steel is then cleaned of oxide scale and finished in a specific series of rolling to just over the desired thickness, heating to controlled temperatures, and final rolling to the desired thickness.

Galvanized Steel Coils is specially designed steel sheets that are employed in several furbishing and manufacturing purposes.Steel coils are thin sheets that can be rolled up into incessant coils. The galvanized coil is employed outdoor, as it shows anti rusting tendencies. Most significantly, it is used in constructing strong roofing system.

Dx51d Gi Metal Spangle Zinc Coated cold rolled Galvanized Steel Coil are successfully used in industries with stringent requirements for corrosion resistance, durability, strength and appearance, and can be formed or have various coatings applied.

Compared with hot rolled steel plate, Galvanized steel Ss400 cold rolled steel coil thickness is more accurate, and the surface is smooth, beautiful, but also has a variety of superior mechanical properties, especially machining performance.