23QG095 Cold Rolled Oriented Electrical Steel

Cold rolled steel is our most common and commonly used cold rolled products.Its brand can be generally divided into: ST12, ST13, ST14, ST15, ST16 and so on.

Factory Cold Rolled Steel Coil Full Hard galvanized Steel Coil immersing the thin steel plate in the molten zinc bath, and adhering a layer of zinc thin steel plate on the surface. It is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the zinc-melted plating tank to make galvanized steel plate; alloyed galvanized steel plate.

Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate.

Galvanized refers to a surface treatment technology that coats a layer of zinc on the surface of metals, alloys or other materials for aesthetics and rust prevention. The main methods used are hot-dip galvanizing and electro-galvanizing. It prevents corrosion of steel, and its protective performance is closely related to the thickness of the coating.

Galvanized Steel Sheet in Coil (GI) is produced by passing the Full Hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface. It has excellent corrosion resistance, paintability, and workability due to Zinc’s characteristics.

A36 Prime 10# Mild Cold Rolled Steel Coil is made of hot-rolled coils and rolled at room temperature below the recrystallization temperature. Cold-rolled steel has good performance. That is, cold-rolled steel can be thinner and more precise.

Cold-rolled sheet in coil form is produced by removing rust from hot-rolled sheet by “pickling” it in a weak acid solution, then washing, brushing, drying, oiling and unrolling the sheet and finally performing cold-rolling by passing the sheet through a reducing mill under pressure and winding it into a roll.

Cold-rolled steel coils have good properties, and cold-rolled strips and steel sheets with thinner thickness and higher precision can be obtained by cold-rolling. High flatness, high surface finish, clean and bright surface of cold-rolled sheet. It is easy to be coated and processed and has the characteristics of high stamping performance and low yield point, so cold-rolled steel coil has a wide range of uses, mainly used in automobiles and building materials. At the same time, it is also the substrate for the production of galvanized steel sheets in coil and galvalume steel coil.

Cold rolled galvanized steel coil
It is cold-rolled or hot-rolled, long and narrow long steel plate is coated with a layer of raw materials called (zinc, aluminum) to varying degrees. Hot-dip galvanizing has the advantages of uniform coating, strong adhesion and long service life. The hot-dip galvanized strip steel matrix undergoes a complex physical and chemical reaction with the molten plating solution to form a corrosion-resistant zinc-iron alloy layer with a compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, its corrosion resistance is strong.

Top quality JIS 0.45mm*1200mm galvanized steel coil can produce zero spangles, small spangles, ordinary spangles, etc. The thickness is from 0.125mm to 4.5mm, the width is from 500mm to 1250mm, the zinc coating is from 40-275 g/m², the surface is passivated and oil can be coated.

Cold-rolled is processed from hot-rolled sheets at room temperature. Although the temperature of the steel sheet will be heated during the processing, it is still called cold-rolled. Due to the continuous cold deformation of hot rolling, the mechanical properties are relatively poor and the hardness is too high. It must be annealed to restore its mechanical properties, and those without annealing are called hard rolled coils.

SPCC Cold Rolled Steel Coil It is rolled at room temperature, below its recrystallization temperature, which will increase the steel strength and hardness, and also make its surface smooth. As a leading cold rolled steel coil manufacturer, Gnee Steel develops and offers a wide range of steel products with different sizes, finishes, designs to meet our customers’ needs. Welcome to talk with us about your project.