Products
Corrugated Galvanized Steel Sheet
Corrugated Galvanized Steel Sheet
Corrugated Galvanized Steel Sheet
Corrugated Galvanized Steel Sheet
Corrugated Galvanized Steel Sheet
Corrugated Galvanized Steel Sheet
Corrugated Galvanized Steel Sheet
Corrugated Galvanized Steel Sheet

Corrugated Galvanized Steel Sheet

Corrugated Galvanized Steel Sheet - Factory, Suppliers, Manufacturers From China We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for Corrugated Galvanized Steel Sheet
Types :Corrugated Galvanized Steel Sheet
Thickness :0.25-0.65mm
Width :600-1250 mm
Length:Customized
Share:
Introduction
Corrugated Galvanized Steel Sheet

Galvanized sheet refers to a steel sheet coated with zinc on the surface. This kind of steel plate is mainly used in construction, automobiles and household appliances. For example, the construction is mainly used in roof panels, doors,sandwich panels, garage doors, factory buildings, fences, etc. The automotive industry is mainly used for corrosion-resistant parts such as automobile shells. The home appliances are mainly used in home appliance shells, civil chimneys, kitchenware, etc.

Name: corrugated galvanized steel sheet

Material : DX51D+Z

Surface: zero spangle, regular spangle

Width: BC650–1250mm, AC:608–1025mm

Thickness:0.13–0.7mm

Zinc coating : 20–120g

Length:1meter–6meters

 

 

Technical Data
        According to your request, each size can be selected for diffrent application. Please contact us !
Product Corrugated Galvanized Steel Sheet
Width 600--1500mm
Thickness 0.12MM~1.2MM
Length 6-12m or According To Customer's Demends
Advantages 1.low foundation cost
2.easy construction
3.time and labor saving
Color Standard RAL color:red,bule,white,grey,brick,etc.
Surface Treatment 1. Galvanized
2. PVC,Black and color painting 
3. Transparent oil,anti-rust oil
4. According to clients requirement
Product Application 1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient
Packing Bundle, or with all kinds of colors PVC or as your requirements

How Much Is A Galvanized Metal Roof?
Galvanized metal roofing prices vary on quality and the market. The cheapest average retail price in the US costs around 5.63$ and it can go up to 6.95$ per square foot (0.09m²).

Will Galvanized Steel Roofing Rust?
Galvanized steel will keep its strength for a significant time before it starts to deteriorate. Although regular steel is formed of iron which can rust when exposed to moisture either within rain or humidity. And over time rust will corrode a steel part to the point of failure.

How Do You Install Galvanized Roofing?
You might need to cut the panel to a desired length as for most panels come up to 30 feet (9.1 m) in length. And it would be best if you allow for a minimum of 20 inches (50 cm) if you need to lap to complete the cutting.

Some panels have pre drilled holes. If yours do not, then you will need to drill holes in them.

Install the panels. Place them directly onto purlins that are attached to the roof trusses, beginning on the outside edge.

Screw down the panels. Drill the holes, and use screws with polycarbonate washers.

Complete the opposite side. If your roof is 2-sided and not just a single slope, you can repeat the installation on the other side of the roof, and install a ridge cap as you proceed across with the panels.

How Do You Cut Corrugated Galvanized Steel?
Determine where the part needs to be cut while having it placed on a flat surface and after measuring it.

Then draw a line down the length or width of the sheet metal using a pencil or marker to mark a cut line. You can cut sheet metal both parallel to the edges, as well as across them.

Hold a magnet up to the sheet to work out if it’s steel or another material. If the magnet is attracted to the sheet metal, then it is made of steel. If not, then it is made of another metal.

Start cutting with a pair of straight edge snips at the top of the marked line, if the sheet is steel. Use a pair of tin snips at the line if it’s tin, aluminum or etc. Both of those tools are basically industrial strength scissors.

Cut along the pencil line with the straight edge shears or the tin snips until you’ve got cut the enter piece of corrugated sheet.

How Long Does A Galvanized Roof Last?
Although humidity helps corrosion, temperature itself has less of an impression.

Galvanized coating does well in extreme environments due to its protective layer.

The zinc layer of “hot-dipped” galvanized metal will last within the worst soil from 35 to 50 years and in less corrosive soil for 75 years or more.


FAQ
 

1.Professional Factory

We have our own factory with more than 15years production history in hoist equipment manufacturer.

 

2.High Quality

All of our products have been checked seriously:

With Chemical Composition and Mechanical Properties Analysis; Hydrostatic Test, Dimensional and Visual Inspection, Also With Nondestructive Inspection

 

3.Good Prices

Competitive prices based on the same quality as we are factory supplier.

 

4.Fast Delivery

professional packing, avoid damage.

 

5.OEM Custom

Samples can be made according to your requirements before placing order.

 

6.Best Service

Your kind inquiry will be replied in 8 hours or 24 hours if time difference.

 

7.Help to Solve Problem

Specialized team make us strong support to solve your problems from purchase to application.









 
Inquiry
TAGS:
Related Products
PPGI Corrugated Steel Roofing Sheets
PPGI Corrugated Steel Roofing Sheets
Galvanized Corrugated Steel Sheet
Galvanized Corrugated Steel Sheet
Color Coated Roofing Sheets
Color Coated Roofing Sheets
Related News
Chilean customers came to GNEE to discuss galvanized steel projects
On March 27, 2024, a Chilean customer came to GNEE steel to discuss galvanized steel.
2024-03-28
Defects arising from cold rolling and annealing
The main purpose of strip annealing is to eliminate work hardening of cold rolling, reduce deformation resistance, restore plasticity, and improve the deep drawing performance of strip.
2024-01-23
What Is PPGI?
The thickness ranks from 0.5mm-3mm. They want to check which thickness is more suitable for them and make the right decision.
2022-04-29